int led = 3; //numéro de la broche Arduino pilotant la LED sur le shield PERIPH // the setup routine runs once when you press reset: void setup() { // initialize the digital pin as an output. pinMode(led, OUTPUT); } // the loop routine runs over and over again forever: void loop() { digitalWrite(led, HIGH); // turn the LED on (HIGH is the voltage level) delay(1000); // wait for a second Cette ligne n'a rien à faire ici, elle provoque une erreur de compilation, il faut donc l'effacer digitalWrite(led, LOW); // turn the LED off by making the voltage LOW delay(1000); // wait for a second }